Anchored Masonry Veneers

Words: Stephen GetzConstruction of the veneer on a brick veneer cavity wall relies on quality products and tradesmen to fulfill the design life and functional expectations of the owner and its occupants.

As part of the building's veneer design criteria, the brick tie anchoring system should be carefully evaluated and reviewed with consideration to the following:
  • Tie stiffness

  • Tie strength

  • Tie spacing

  • Fastener requirements

  • Air barrier interface

  • Material type and finish

  • Tie versatility
Construction of brick cavity walls tied to back-up materials other then masonry relies on a relatively stiff brick tie anchoring system for an optimum performing façade. The result minimizes excessive veneer deflection under wind load, which creates less potential for cracking of the veneer. Less cracking means less water migration into the cavity.

A tie illustrating good strength performance characteristics accommodates placement spacing greater than a typical 16- X 16-inch pattern as used with conventional plate and pintle ties, and increases the spacing area to 16 X 24 inches. This generous spacing would remain compliant with standard veneer wall construction requirements of the ACI 530/ASCE 5/TMS 402 criteria. It's important to note that when applying the greater spacing, the quantity of ties required is reduced by almost one-third, which generates a significant cost savings to the owner without compromise to the veneer's performance.

One must also consider a compatible fastener for the connection of the tie assembly to the stud-framing backup. A suitably designed brick anchoring system that utilizes a single fastener for its backup connection will provide a cost-effective installation and lessen the quantity of breaches in the air barrier by 50 percent over conventional ties. A quality Tek screw for steel stud or lag screw for timber connections is efficiently installed and available in material compatible to the anchor plate material.

Finally, the use of insulation in brick veneer cavity wall construction is a popular means to conserve building energy. A tie system must be adaptable for various wall configurations and accommodate insulation of varying thicknesses.

CTP Inc., for example, provides wall ties and anchors that illustrate tie stiffness three times that of conventional ties in the marketplace. The base plate can utilize a single screw fastener for 16-gauge metal stud and timber connections and is manufactured in sizes to bridge various insulation thicknesses. Spacing of the ties is recognized at the maximum permissible by code. The complete assembly is available in hot-dip galvanized or stainless steel finishes. The tie system also utilizes a proprietary multi-functional V-shaped tie that can be used for standard brick veneer construction, or be utilized with reinforcement for seismic applications. The installation is efficient and notably strong.
 0
The STABILA Force Driven by Operations
July 2025

Leadership In today's competitive business landscape, maintaining an efficient, well-organized warehouse is essential for meeting customer demands and ensuring smooth operations. By implementing effective processes and best practices, businesses can achi

MAP Partner
Read More
MASONRY STRONG Podcast, Episode 24 Recap: Gary Hensley, VP of Sales at Oldcastle Adams
July 2025

On this episode of the MASONRY STRONG Podcast, Gary Hensley joins Justin in Indianapolis to talk about his story within the masonry industry, how he got started, how he's seen it evolve, and where he sees it going. Why the Masonry Industry? Concrete and

Read More
The Enduring Power of Structural Masonry
July 2025

Masonry has been holding its ground for millennia — literally. And thanks to the simple brilliance of arching action, it continues to do so with strength, style, and surprising efficiency. In an era of advanced modeling and fast-moving schedules, one time

Read More
Business Building: Do Project Manager / Estimator Combos Work?
July 2025

Steve owns SJP Contractors, a mid-size general contractor specializing in commercial projects. Over the last several years, his company has grown to over $16 million in annual sales, with an average project size of $500,000 to $1,500,000, employing 45 off

George Hedley
Business Building
Read More